Overview

The HM-6514/883 is a 1024 x 4 static CMOS RAM fabricated using self-aligned silicon gate technology. The device utilizes synchronous circuitry to achieve high performance and low power operation. On chip latches are provided for addresses allowing efficient interfacing with microprocessor systems. The data output can be forced to a high impedance state for use in expanded memory arrays. Gated inputs allow lower operating current and also eliminates the need for pull up or pull down resistors. The HM-6514/883 is fully static RAM and may be maintained in any state for an indefinite period of time. Data retention supply voltage and supply current are guaranteed over temperature.

  • This Circuit is Processed in Accordance to MIL-STD- 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
  • Low Power Standby 125µW Max
  • Low Power Operation 35mW/MHz Max
  • Data Retention at 2.0V Min
  • TTL Compatible Input/Output
  • Common Data Input/Output
  • Three-State Output
  • Standard JEDEC Pinout
  • Fast Access Time 120/200ns Max
  • 18 Pin Package for High Density
  • Gated Inputs - No Pull Up or Pull Down Resistors Required
  • On-Chip Address Register

Documentation

= Featured Documentation
Type Title Date
Datasheet
HM-6514/883 Datasheet
PDF 342 KB
Brochure
Intersil Space Products Brochure
PDF 5.02 MB
Product Change Notice
PCN15064 - Qualification of Alternate Assembly Site for CERDIP (MMT)
PDF 323 KB
End Of Life Notice
PLC15033 - Product Discontinuance / Obsolescence NotificationProducts
PDF 200 KB
Product Advisory
PA14064 - Minimum Line Quantity Change
PDF 282 KB
Product Change Notice
PCN14017 - Test Site Change for the Listed Intersil Products - Carsem (CAS) Ipoh, Malaysia
PDF 174 KB
Product Change Notice
PCN11040 - Manufacturing Site Change for Assembly of Intersil Ceramic Dual-In-Line (Frit Seal Cerdip) Products - Amkor (ATP) Muntinlupa City, Philippines
PDF 151 KB
Application Note
AN9867: End of Life Derating: A Necessity or Overkill
PDF 338 KB
Application Note
AN9654: Use of Life Tested Parts
PDF 224 KB
9 items

Design & Development

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.

Explore ECAD Models
Diagram of ECAD Models

Product Options

    Processing table
    Pkg. Type
    Carrier Type
    MOQ
    Buy / Sample
    Part Number
    HM1-6514/883
    circleActive
    memory
    view_in_ar
    		CERDIP Tube 200
    HM1-6514B/883
    circleActive
    memory
    view_in_ar
    		CERDIP Tube 120
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product