Overview

The HIP2100 is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC. The low-side and high-side gate drivers are independently controlled and matched to 8ns. This gives the user maximum flexibility in dead-time selection and driver protocol. Undervoltage protection on both the low-side and high-side supplies force the outputs low. An on-chip diode eliminates the discrete diode required with other driver ICs. A new level-shifter topology yields the low-power benefits of pulsed operation with the safety of DC operation. Unlike some competitors, the high-side output returns to its correct state after a momentary undervoltage of the high-side supply.

HIP2100 Functional Diagram
HIP2100 Functional Diagram
  • Drives N-Channel MOSFET Half Bridge
  • SOIC, EPSOIC, and QFN Package Options
  • SOIC and EPSOIC Packages Compliant with 100V Conductor Spacing Guidelines of IPC-2221
  • Pb-Free (RoHS Compliant)
  • Bootstrap Supply Max Voltage to 114VDC
  • On-Chip 1Ω Bootstrap Diode
  • Fast Propagation Times for Multi-MHz Circuits
  • Drives 1000pF Load with Rise and Fall Times Typ 10ns
  • CMOS Input Thresholds for Improved Noise Immunity
  • Independent Inputs for Non-Half Bridge Topologies
  • No Start-Up Problems
  • Outputs Unaffected by Supply Glitches, HS Ringing Below Ground, or HS Slewing at High dv/dt
  • Low Power Consumption
  • Wide Supply Range
  • Supply Undervoltage Protection
  • 3Ω Driver Output Resistance
  • QFN Package:
    • Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline
    • Near Chip Scale Package Footprint, which Improves PCB Efficiency and has a Thinner Profile

Applications

  • Telecom Half Bridge Power Supplies
  • Avionics DC/DC Converters
  • Two-Switch Forward Converters
  • Active Clamp Forward Converters

Documentation

Design & Development

HIP2100EVAL2

Evaluation
Learn More

100V/2A Peak High-Frequency Half Bridge Driver with CMOS Logic Inputs Evaluation Board

The HIP2100 is a high frequency, 100V half bridge N-channel power MOSFET driver IC. The HIP2100 general-purpose design tool is a very simple evaluation board that can...

Featured Documents:
HIP2100EVAL User Guide

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.

Explore ECAD Models
Diagram of ECAD Models

Product Options

    Processing table
    Pkg. Type
    Carrier Type
    Moisture Sensitivity Level (MSL)
    Price (USD) | 1ku
    Buy / Sample
    Part Number
    HIP2100EIBZ
    circleActive
    memory
    spa
    view_in_ar
    Samples Available
    Buy Now
    		SOICN-EP Tube 2 Get Samples,
    HIP2100EIBZT
    circleActive
    memory
    spa
    view_in_ar
    Buy Now
    		SOICN-EP Reel 2
    HIP2100IBZ
    circleActive
    memory
    spa
    view_in_ar
    Samples Available
    Buy Now
    		SOICN Tube 1 2.23 Get Samples,
    HIP2100IBZT
    circleActive
    memory
    spa
    view_in_ar
    Buy Now
    		SOICN Reel 1
    HIP2100IRZ
    circleActive
    memory
    spa
    view_in_ar
    Samples Available
    		 QFN Tube 3 Get Samples,
    HIP2100IRZT
    circleActive
    memory
    spa
    view_in_ar
    		QFN Reel 3
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product